" Mühendislik çözümlerinin limitleri hakkında
fikrinizi değiştirmeyi amaçlıyoruz."

  GYAF1
  Flat - head probe with integrated controller

  • The GYAF1-probe is an all-in-one type sensor with integrated controller.

  • After supplying DC24V to the probe, an analogue voltage and/or current, which are proportional to the position of the magnet, can be obtained.

  • Reversed output or bipolar output can be supported as well.

  • The flat head permits a miniaturized application, and the flange makes the installation easier, compared with the conventional screw type probes.
  Spesifications
Effective stroke 15mm~3000mm
Output 0~10V
4~20mA
others(bipolar)
Sensor rod diameter φ10
Cable connection (Standard:1.5m, for extra cable, specify the length.) Connector[standard]
Pigtail type
Resolution < 0.01%FS
Accuracy Non- linearity < ±0.025%FS TYP
Repeatability < ±0.01%FS
Temp drift < 40ppm FS/℃
Output Voltage output 0~10V or 10~0V
(output current:Max.5mA, load:Min.2kΩ)
Current output 4~20mA or 20~4mA
(load:Min.500Ω)
Power supply +24(±2)VDC (100mA)
Frequency response Std 1kHz(depending on stroke) sampling
Environment Admissible 35MPa(probe rod)
Operating Temp. -20℃~+80℃
Storage Temp -40℃~+80℃
Vibration 6G(or 40Hz 2mmPP)
Shock 50G(2msec)
Protection IP67 [standard], option IP68 (see page 53)
     
Copyright © 2014    |   Robat Kontrol Otomasyon Ar-Ge Ve Yazılım Tic. Ltd. Şti